Author Topic: PANGAEA CP-100 :PC Editor/Application  (Read 614 times)

ccouch7

  • Newbie
  • *
  • Posts: 7
    • View Profile
PANGAEA CP-100 :PC Editor/Application
« on: April 18, 2017, 02:32:01 am »
Is anyone else having problems getting the new PC editor to work?

I updated the firmware to 2.5.5 and that went ok.

But when I followed the instructions to install the Editor it seemed
like the drivers (amt.inf ?) it needed to work were not included in the download.
________________________________________
The application’s installation instructions:

1. Download the archive file CP100Setup.zip.
2. Unzip the file.
3. Connect the CP-100 to a PC with an USB cable and choose the CP-100 mode – USB Drive
4. Copy in the USB drive root folder the file – firmware (it is in the unzipped folder).
5. Safely unmount USB-drive and disconnect the USB cable.
6. Connect a power adapter to the CP100.
7. After the program is renewed, connect the USB cable and chose CP-100 mode “Serial port”.
8. Install CP-100 USB virtual serial port drivers – amt.inf (the file is in the unzipped archive folder).
9. Run the file CP100Setup.exe to install the application.
10. On the end of the installation, run the application AMT Pangaea CP_100
.
____________________________________________________________________

Any help much appreciated.
« Last Edit: April 18, 2017, 02:45:24 am by ccouch7 »

ccouch7

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: PANGAEA CP-100 :PC Editor/Application
« Reply #1 on: April 21, 2017, 02:57:45 am »
No help? AMT?? :'(

Alexander AMTsupport

  • Global Moderator
  • Newbie
  • *****
  • Posts: 17
    • View Profile
Re: PANGAEA CP-100 :PC Editor/Application
« Reply #2 on: April 21, 2017, 04:26:32 am »
I can't understand the problem.
I downloaded the file CP100Setup.zip
And there is the file amt.inf

Alexander AMTsupport

  • Global Moderator
  • Newbie
  • *****
  • Posts: 17
    • View Profile

ccouch7

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: PANGAEA CP-100 :PC Editor/Application
« Reply #4 on: April 27, 2017, 12:13:35 am »
When I click on the amt.inf file it doesn't give an option to run or install it,
it just opens an info file.
The directions are not clear where they say to install the virtual serial port
drivers-amt.inf file,
install it where? There is nothing there to install?

Not really into changing/modifying my system just to use an editor.
I have a few other editors from other products and never had to do
anything like that to use their editors.
« Last Edit: April 27, 2017, 12:18:24 am by ccouch7 »

Alexander AMTsupport

  • Global Moderator
  • Newbie
  • *****
  • Posts: 17
    • View Profile
Re: PANGAEA CP-100 :PC Editor/Application
« Reply #5 on: May 02, 2017, 06:07:45 am »
Maybe these links will help

In order to install amt.inf driver (the driver for USB serial port),
you have to make several steps and you have to turn off
the driver digital signature.
If you are not familiar with these procedures, please look at
the links below, maybe they will be useful.
Also, You could try to find better links (in your language for example)   



How to disable driver signature
http://www.waledacdroid.com/2015/11/how-to-disable-driver-signature.html


How To Disable Driver Signature Enforcement in Windows 10   
https://www.youtube.com/watch?v=71YAIw7_-kg


How To Install Device Driver from INF file?
https://www.youtube.com/watch?v=3QFK9avy5gU

How To: Install a Windows 10 Driver using an INF File
https://www.youtube.com/watch?v=S97hJsg4H20


how to turn off digital signature?
https://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/how-to-i-turn-off-digital-signature/a7047647-bf29-468f-a885-8e23d60f3daa