The official forum of AMT Electronics

Discussion about the products of AMT Electronics => "SS" Preamps => Topic started by: radiator on November 14, 2016, 06:41:50 am

Title: Next SS-20 issue...
Post by: radiator on November 14, 2016, 06:41:50 am
Hi there!

I got some output signal problems.
If send/return is not used (empty jacks) the output signal's suddenly very, very quiet - almost muted.
But if I use the effects loop, or just plug in a cable from send directly to return, everything's fine and sound's in regular volume.
This behavior's not normal, or am I off the wall  :o ?!? Don't know, if there's something broken, or any jumper in wrong position?
Does anybody has issues like that? Thanks for help!
Title: Re: Next SS-20 issue...
Post by: Alexander AMTsupport on November 17, 2016, 08:52:55 am
Hi there!

I got some output signal problems.
If send/return is not used (empty jacks) the output signal's suddenly very, very quiet - almost muted.
But if I use the effects loop, or just plug in a cable from send directly to return, everything's fine and sound's in regular volume.
This behavior's not normal, or am I off the wall  :o ?!? Don't know, if there's something broken, or any jumper in wrong position?
Does anybody has issues like that? Thanks for help!

I think the problem is with the one of the sockets (send or return) does not work well. There is no contact (probably) when nothing is plugged into a socket. See attachment
Title: Re: Next SS-20 issue...
Post by: radiator on November 18, 2016, 12:02:14 pm
Okay - send/return is described as xs10/xs11 but anyway - issue's solved!
Thanx so much, now everything's fine again.